Bogar Tech Designs - Calcomanías precortadas para ventana trasera de cuarto lateral de la bandera estadounidense compatibles con Jeep Grand Cherokee

The first one I was about to put on and the wind took it out of my hand and threw it on the sandy driveway. SOB! I rinsed it with water and was pleasantly surprised how well it cleaned it off. They're very sticky so be prepared. Be better prepared than I was.

Que free bird, looks super beast.

Well made and cut sticker. Fit perfect on my 2021 Jeep Grand Cherokee. I get compliments all the time on how good it looks on my vehicle. I tried another one from Xplore Off-road but returned because it was not cut properly for the window. Install can be tricky if you rush it. Take your time and look at videos on how to do it. I had 2 tiny bubbles that came out easy with a little heat from a heat gun or hairdryer. Highly recommend!

10.17.22 updateThey sent a replacement. This came in fine shape and without issues. It's a 4/5 only because the video shows this being a 1 person job. Unless you are pretty darn good you'll definitely need help. But the material, adhesive and so on have held up even after car washes. Let's see how it holds up but I do recommend it I just need to make it clear that you NEED a person to help you with this if you have never applied vinyl or done this before.05.25.22So the package arrived damaged (not sellers fault). But when I opened it I noticed that the top protective film basically had pulled away exposing the vinyl. This was already a bad sign. When I fully opened and laid out the vinyl, as per the video, I noticed a jagged crease down one of the stripes. Well that makes it even worse. …

Exactly what I was looking for. Installation was a breeze and they fit perfectly. Watch the install video, take your time, and make sure you’re lined up in the corners. Took 20 minutes to install, no creases or bubbles. I understand the frustration when they weren’t cut to the proper size but that issue seems to be ironed out.

Firstly, the tube these ship in have very sharp staples that draw blood when you reach and try to extract the decal. I know this to be true. Not a big thing, man up.Secondly, when trying to detach from the backing, it does not come off cleanly. The first one tore so badly that it and my temper ended up in shreds on the garage floor.Undaunted, I decided to install the second one and see how it looked. I got the field on an dstepped back to look at it. On tinted windows, it's nearly invisible.Don't waste your money. Nice idea. Poor execution.

This is very nice material, there are some gaps, but if you work with it you will find out that you can almost fill them in with positioning, If i wouldn't have had the vent covers on those windows (I have the six piece one on my grand) it would have been very easy, but due to those it made it harder, Any bubbles can be easily taken out with a pin or the corner of a razor blade to poke a hole to get the air out, even works good on creases. Take your time, follow the direction, and use a squeegee to make it smooth. Would recommend these to others.

I highly recommend installing in a garage or covered area. I did it on a semi-windy day and at points the decal wanted to stick in other places. Very easy to remove and reapply before a pressure applying. I would also recommend that the window is spotless clean - The instructions were spot on!