A653 Hoja de acero, terminado de zinc galvanizado, enrollado térmico, tolerancia estándar, pulgada, ASTM A653, 1

The A653 carbon steel sheet has been hot rolled, is zinc galvanized, meets American Society for Testing and Materials International ASTM A653 specifications, and has a standard tolerance. The A653 carbon steel grade has low carbon content for strength comparable to 1008 carbon steel, and provides good formability and weldability. The sheet has been hot rolled, a method of compressing metal between two rollers at a temperature above the material's recrystallization temperature to attain the specified dimensions. The zinc galvanized finish provides corrosion resistance.Steel is an iron alloy with carbon and other elements that modify the steel to achieve specific properties. In general, steels with higher carbon content have greater strength, hardness, and wear resistance, while those with lower carbon content have more formability, weldability, and toughness. Carbon steels, which include most AISI-SAE grades in the 1000 range, are classified by their level of carbon content as low (below 0.3%), medium (0.3% to 0.6%) and high (0.6% and above). Alloy steels, which include AISI-SAE grades in the 1300 and 4000 ranges and above, incorporate elements such as chromium, molybdenum, and nickel to modify properties like machinability and corrosion resistance. Tool steels, which include most grades with a letter and number grade designation, have high carbide content for wear resistance, high hardness, and the ability to hold a cutting edge. Some tool steels are designed to resist deformation when used in elevated temperatures.Tensile strength, used to indicate a material’s overall strength, is the peak stress it can withstand before it breaks. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Toughness describes the material's ability to absorb energy before breaking, while hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. Formability indicates how easily the material can be permanently shaped. Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded.

• Compra segura y envío rápido a todo Costa Rica
• Garantía Yaxa y soporte experto en tu A653 Hoja de acero, terminado de zinc galvanizado, enrollado térmico, tolerancia estándar, pulgada, ASTM A653, 1
• Atención personalizada por WhatsApp y canales oficiales.