Logo Costa Rica Costa Rica
WAC Lighting EN-2460-RB2-S 120V Entrada 24V Salida 60W remoto cerrado transformador electrónico para línea y borde recto, negro disponible en Yaxa Costa Rica -10%
4.4 | +70 ventas

WAC Lighting EN-2460-RB2-S 120V Entrada 24V Salida 60W remoto cerrado transformador electrónico para línea y borde recto, negro

Categoría: Transformadores de Voltaje Bajo

Envío gratis

Precio y disponibilidad de WAC Lighting EN-2460-RB2-S 120V Entrada 24V Salida 60W remoto cerrado transformador electrónico para línea y borde recto, negro

₡127 869,3

₡142 077

Stock disponible

Entrega estimada de 6 a 10 dias habiles en Costa Rica.

Pago seguro garantizado

Información de WAC Lighting EN-2460-RB2-S 120V Entrada 24V Salida 60W remoto cerrado transformador electrónico para línea y borde recto, negro

Descripción detallada +

Remote enclosed electronic transformer for line and straight edge 120V Input 24V output 60 watt. This class 2, UL & cul listed enclosed electronic transformer is the perfect solution for Wiring multiple low voltage fixtures. Class 2 transformers are intrinsically safer transformers because they are compartmentalized to allow no greater than 5 amps of current to be drawn on each compartment. Enclosure cover is easy to remove. Transformer has knockouts on three sides with clips for line voltage Wiring. Secondary Wiring for class 2 transformers do not require conduit sheathed cable or clamp Wiring techniques. This transformer has a low minimum load requirement of 1W to allow the use of LED products. May be dimmed using an electronic low voltage dimmer.. soft start, short and overload circuit protection features. For use with WAC Lighting low voltage under cabinet and recessed lighting systems. Transformers that end with -s include a lead wire for line and straight edge under cabinet systems, and those that end with -t include a lead wire for invisiled 24V tape light systems. 1W minimum load to support low load LED systems. Intrinsically safe, class 2 transformers permit no greater than a 5 amp current to be drawn. Secondary Wiring for class 2 transformers does not require conduit sheathed cable or clamp Wiring techniques. Non-metallic sheathed cable may be used for secondary Wiring in walls and ceilings. Input voltage: 120V AC, output voltage: 24V AC, loads vary based on transformer 60Watt, 100Watt, 150Watt, and 300Watt. Smooth and continuous dimming with an electronic low voltage dimmer. Dimmers should always be installed on the primary side of the transformer. Standards: class 2, UL & cul listed for damp locations.

Beneficios rápidos +
  • Envío rápido
  • Pago seguro
  • Garantía incluida
  • Soporte por WhatsApp
Beneficios clave de WAC Lighting EN-2460-RB2-S 120V Entrada 24V Salida 60W remoto cerrado transformador electrónico para línea y borde recto, negro +
  • Soft start, short and overload circuit protection features. For use with WAC Lighting low Voltage under cabinet and recessed Lighting systems
  • 1W minimum load to support low load LED systems. Intrinsically safe, class 2 Transformers permit no greater than a 5 amp current to be drawn
  • Secondary wiring for class 2 Transformers does not require Conduit sheathed cable or clamp wiring techniques. Non-metallic sheathed cable may be used for secondary wiring in walls and ceilings
  • Input Voltage: 120V AC, output Voltage: 24V AC, loads vary based on transformer 60Watt, 100Watt, 150Watt, and 300Watt
  • Smooth and continuous dimming with an electronic low Voltage dimmer. Dimmers should always be installed on the primary side of the transformer. Standards: class 2, UL & CUL listed for Damp locations
  • Remote Class 2 Transformer
  • 6 foot cord and five SL WC 1 plastic wire clips included
  • Converts 120-Volt to 24-Volt
  • El número de Modelo (ItemModelNumber)
  • ‎EN-2460-RB2-S
  • Soft start
  • short and overload circuit protection features. For use with WAC Lighting low Voltage under cabinet and recessed Lighting systems
  • 1W minimum load to support low load LED systems. Intrinsically safe
  • class 2 Transformers permit no greater than a 5 amp current to be drawn
  • Input Voltage: 120V AC
  • output Voltage: 24V AC
  • loads vary based on transformer 60Watt
  • 100Watt
  • 150Watt
  • and 300Watt
  • Smooth and continuous dimming with an electronic low Voltage dimmer. Dimmers should always be installed on the primary side of the transformer. Standards: class 2
  • UL & CUL listed for Damp locations
¿Por qué comprar en Yaxa? +

Envíos a todo el país

Cobertura nacional con aliados confiables.

Garantía Yaxa

Productos originales y respaldo local.

Pagos seguros certificados

Procesamos tus pagos con pasarelas auditadas.

Ficha técnica +

Otros clientes también compraron

Comprar ahora